Dr. Asad Ullah Khan
Professor, Chemical Engineering
Area of Interest: Rheology, Materials and Polymer Processing, Membrane Science and Technology, Chemical Kinetics
Tel # (Off): 111-001-007   (888)
Served Previously

Prof. Dr. Asad Ullah Khan obtained his B. E Chemical Engineering degree from the NED University of Engineering & Technology, Karachi in the year 1986. He earned his Ph.D in Chemical Engineering from Imperial College, London in the year 1997. He did his post-doctorate from Imperial College, University of London England during the years 1997-2000. He also worked as Research Fellow at the University of Surrey Guildford UK from 2000 to 2002.

Dr. Khan has diverse professional experience to his credit. He started his career as Assistant Production Manager at Synthetic Resin Industries, Sialkot and then joined Pakistan Oil Refinery Limited Karachi as Graduate Trainee Engineer for one year. He also worked as Junior Engineer (Chemical) NPSL Islamabad from 1988 to 1992. During his stay abroad, Dr. Khan worked as Research Scientist at A & R Polymer Products Limited UK from 2002 to 2005. Upon his return from abroad, he joined as Director Polymer Industries, Gujranwala.

On the basis of his academic qualification and experience he was offered a position of Assistant Professor in Chemical Engineering at COMSATS Institute of Information Technology Lahore in the year 2008. By virtue of his excellent academic and research contributions, he attained the position of Professor in the year 2011. In view of his competence, dedication and hard work, he was appointed as HOD and Chairman, Department of Chemical Engineering in year 2010. He made tireless efforts to establish state-of-the-art laboratories of international standards. He is holding key positions in various statutory bodies of COMSATS.

Dr. Khan has published over 60 journals/conference/book-chapter articles, over 40 of these articles are in the impact journals Impact factor journals of international repute. His cummulative impact factor exceeds well over 150. He has the honour of being one of the most cited researchers in his area of specialisation in Chemical Engineering discipline. He holds membership of various professional bodies related to his field.

Dr. Khan has substantially contributed for the uplift of educational standards and quality. He possesses versatility, vision and academic acumen which have marked him as a distinguished academician and successful administrator.

Publications:

Book Chapters:
1. K. Majeed, R. Arjmandi, M.A. Al-Maadeed, A. Hassan, Z. Ali, A.U. Khan, M.S. Khurram, I.M. Inuwa, P.N. Khanam (2017), "Structural properties of rice husk and its polymer matrix composites: An overview ", Lignocellulosic Fibre and Biomass-Based Composite Materials, edited by: Mohammad Jawaid, published by: ELSEVIER SCIENCE & TECHNOLOGY, Cambridge, United Kingdom, pp: 473-490, Standard: 2052-5281    (External URL)
2. Naveed Ahmed, Nasir M. Ahmad, Asad U. Khan, Haseeb Shaikh, Asghari Maqsood, Abdelhamid Elaissari (2016), "Biodegradable Polymers Particles for Theranostic Applications", Encyclopedia of Biomedical Polymers and Polymeric Biomaterials, edited by: Munmaya Mishra, published by: Taylor & Francis (CRC Press), pp: 1530-1544, Standard: ISBN-10: 9781439898796    (External URL)
3. Zaki Ahmad, Kinwal Bilal, Asad U. Khan (2016), "Emerging Technologies as a Tool for Development of Human Values and Global Peace", Promoting Global Peace and Civic Engagement through Education, edited by: Kshama Pandey and Pratibha Upadhyay, published by: IGI Global, pp: 267-304, Standard: ISBN10: 1522500782    (External URL)
4. Zaki Ahmad, Robina Farooq, Asad U. Khan, Saira Tausif, Ahmad Shafique (2015), "New Generation Nano-coatings and New Trends in Processing and Applications", Comprehensive Guide for Nano-coatings Technology Volume-2: Characterization and Reliability, edited by: Mahmood Aliofkhazraei, published by: Nova SCience Publishers, pp: Chapter 2, Standard: ISBN: 978-1-63482-646-4    (External URL)
5. Zaki Ahmad, Asad U. Khan, Robina Farooq, Naila Riaz Mastoi and Tahir Saif (2015), "Hydrophobicity — A Green Technique for Enhancing Corrosion Resistance of Alloys", New Trends in Alloy Development, Characterization and Application, edited by: Zaki Ahmad, published by: InTech Publisher, pp: 195-273, Standard: ISBN 978-953-51-2171-8    (External URL)
6. Zaki Ahmad, Robina Farooq, Asad U. Khan, Natasha Hussain and Ahmad Shafique (2014), "Bimodal U.V assisted Nano-TiO2 Catalyst – Crumb Rubber Device for Treatment of Contaminated Water", Aquananotechnology: Global Prospects, edited by: David E. Reisner, T. Pradeep, published by: Taylor and Francis (CRC Press), pp: 1-14, Standard: ISBN: 978-1-4665-1224-5    (External URL)
Journal Papers:
1. Usman Saeed, Asad Ullah Khan, Asim Laeeq Khan, Mazhar Amjad Gilani, Muhammad Roil Bilad (2022), "Separation of Carbon Dioxide by Potassium Carbonate based Supported Deep Eutectic Liquid Membranes: Influence of Hydrogen Bond Donor", Journal of Membrane Science and Research, pp: 526587, 7 pages, Vol: 8, ISSN: 2476-5406, DOI: 10.22079/JMSR.2021.526587.1460, Impact Factor: 1.19    (External URL)
2. Mian Fawaz Ahmad, M. Asad Abbas, Azhar Mahmood, Hifza Rasheed, M. Abdul Qadir, Asad U. Khan, Hazim Qiblawey, Shenmin Zhu, Rehan Sadiq, Niaz A. Khan, Nasir M. Ahmad (2021), "Hybrid Beads of Zero Valent Iron Oxide Nanoparticles and Chitosan for Removal of Arsenic in Contaminated Water", Water, pp: 2876, 15 pages, Vol: 213, ISSN: 2073-4441, DOI: https://doi.org/10.3390/w13202876, Impact Factor: 3.103    (External URL)
3. Usman Saeed, Asim Laeeq Khan, Mazhar Amjad Gilani, Muhammad Roil Bilad, Asad Ullah Khan (2021), "Supported deep eutectic liquid membranes with highly selective interaction sites for efficient CO2 separation", Journal of Molecular Liquids, pp: 117509, 9 pages, Vol: 342, ISSN: 1873-3166, DOI: https://doi.org/10.1016/j.molliq.2021.117509, Impact Factor: 6.165    (External URL)
4. Usman Saeed, Asim Laeeq Khan, Mazhar Amjad Gilani, Muhammad Aslam, Asad Ullah Khan (2021), "CO2 separation by supported liquid membranes synthesized with natural deep eutectic solvents", Environmental Science and Pollution Research, pp: 33994–34008, Vol: 28, ISSN: 0944-1344, DOI: https://doi.org/10.1007/s11356-020-10260-x, Impact Factor: 4.223    (External URL)
5. Tauqeer Abbasa, Tanush Wadhawan, Asad Khan, John McEvoy, Eakalak Khan (2021), "Iron turning waste: Low cost and sustainable permeable reactive barrier media for remediating dieldrin, endrin, DDT and lindane in groundwater", Environmental Pollution, pp: 117825, 13 pages, Vol: 289, ISSN: 0269-7491, DOI: https://doi.org/10.1016/j.envpol.2021.117825, Impact Factor: 8.071    (External URL)
6. Umbreen Fatima, Muhammad Zafar, Asad Ullah Khan, Tahir Saif, Abdul Razzaq, Woo Young Kim (2021), "Facile synthesis of transparent glass surfaces via hydrothermal route for superhydrophobic performance", Journal of Nanoscience and Nanotechnology, pp: 4824-4829, Vol: 21, DOI: doi:10.1166/jnn.2021.19266, Impact Factor: -   
7. Usman Saeed, Asim Laeeq Khan, Mazhar Amjad Gilani, Muhammad Roil Bilad, Asad Ullah Khan (2021), "Supported liquid membranes comprising of choline chloride based deep eutectic solvents for CO2 capture: Influence of organic acids as hydrogen bond donor", Journal of Molecular Liquids, pp: 116155, 8 pages, Vol: 335, ISSN: 1873-3166, DOI: https://doi.org/10.1016/j.molliq.2021.116155, Impact Factor: 6.165    (External URL)
8. Reema Mushtaq, Muhammad Asad Abbas, Shehla Mushtaq, Nasir M. Ahmad, Niaz Ali Khan, Asad U. Khan, Wu Hong, Rehan Sadiq and Zhongyi Jiang (2021), "Antifouling and Flux Enhancement of Reverse Osmosis Membrane by Grafting Poly (3-Sulfopropyl Methacrylate) Brushes", Membranes, pp: 213, 16 pages, Vol: 11, ISSN: 2077-0375, DOI: https://doi.org/10.3390/membranes11030213, Impact Factor: 4.106    (External URL)
9. Tauqeer Abbasa, Tanush Wadhawan, Asad Khan, John McEvoy, Eakalak Khan (2020), "Virgin (Fe0) and microbially regenerated (Fe2+) iron turning waste for treating chlorinated pesticides in water", Journal of Hazardous Materials, pp: 122980, Vol: 398, Standard: 0304-3894, Impact Factor: 7.650    (External URL)
10. Muhammad Sajid, Muhammad Ayoub, Yoshimitsu Uemura, Suzana Yusup, Mahmood Saleem, Bawadi Abdullahb, Asad U. Khan (2019), "Comparative study of glycerol conversion to polyglycerol via conventional and microwave irradiation reactor", Materials Today: Proceedings, pp: 2101–2107, Vol: 16, Standard: 2214-7853    (External URL)
11. Tauqeer Abbas, John McEvoy, Asad Khan Tanush Wadhawan, Eakalak Khan (2019), "Iron Turning Waste Media for Treating Endosulfan and Heptachlor Contaminated Water", Science of the Total Environment, pp: 124-133, Vol: 685, Standard: 0048-9697, Impact Factor: 5.589    (External URL)
12. Iqra Munnawar; Sadia Iqbal; Muhammad N. Anwar; Mehwish Batool; Sheraz Tariq; Nosheen Faitma; Asim L. Khan; Asad U Khan; Umair Nazir; Tahir Jamil; Nasir M Ahmad (2019), "Quaternized Trimethyl Functionalized Chitosan Based Antifungal Membranes for Drinking Water Treatment", Carbohydrate Polymers, pp: 17-25, Vol: 2017, Standard: 0144-8617, Impact Factor: 6.044    (External URL)
13. Dilawar Ali, M.Z. Butt, I. Muneer, M.A. Farrukh, M. Aftab, M. Saleem, F. Bashir , A.U. Khan (2019), "Synthesis and characterization of sol-gel derived La and Sm doped ZnO thin films: A solar light photo catalyst for methylene blue", Thin Solid Films, pp: 86-98, Vol: 679, Standard: 0040-6090, Impact Factor: 1.888    (External URL)
14. M. Tahir Afzal, Azeem Mushtaq, Fahad Rehman, Asad U. Khan, Naim Rashid, Wasif. F. Hussain, , Jian Xu and M. Saif Ur Rehman (2018), "Bioremediation of textile wastewater and successive biodiesel production using microalgae", Renewable & Sustainable Energy Reviews, pp: 3107-3126, Vol: 82, Impact Factor: 8.050    (External URL)
15. M. Tahir Afzal, Azeem Mushtaq, Fahad Rehman, Asad U. Khan, Naim Rashid, Wasif. F. Hussain, , Jian Xu and M. Saif Ur Rehman (2018), "Bioremediation of textile wastewater and successive biodiesel production using microalgae", Renewable & Sustainable Energy Reviews, pp: 3107-3126, Vol: 82, Impact Factor: 8.050    (External URL)
16. Rashid Nawaz, Naghmana Rashid, Zulfiqar Ali, Asad U Khan, M.Shahid Nazir, Noaman Ul- Haq (2018), "Effects on thermal and ablative properties of phenolic resin (novolac) blended acrylonitrile butadiene rubber", Fibers and Polymers, pp: 1318-1326, Vol: 19, Standard: 1229-9197, Impact Factor: 1.353    (External URL)
17. Rashid Nawaz, Naghmana Rashid, Zulfiqar Ali, Asad U Khan, M.Shahid Nazir, Noaman Ul- Haq (2018), "Effects on thermal and ablative properties of phenolic resin (novolac) blended acrylonitrile butadiene rubber", Fibers and Polymers, pp: 1318-1326, Vol: 19, Standard: 1229-9197, Impact Factor: 1.439    (External URL)
18. Haleema Tariq Bhatti, Nasir Ahmad, Muhammad Bilal Khan Niazi, Muhammad Azeem Ur Rehman Alvi, Muhammad Nabeel Anwar, Waqas Cheema, Sheraz Tariq, Mehwish Batool, Zaeem Aman, Hussnain Ahmed Janjua, Asim L. Khan, Asad Khan and Naveed Ahmad (2018), "Graphene Oxide-PES Based Mixed Matrix Membranes for Controllable Antibacterial Activity Against Salmonella typhi and Water treatment", International Journal of Polymer Science, pp: Article ID 7842148, Vol: 2018, Standard: 1687-9422, Impact Factor: 1.718    (External URL)
19. Mengyao Yang, Muhammad Saif Ur Rehman, Tingxuan Yan, Asad U Khan, Piotr Oleskowicz-Popiel, Xia Xu, Ping Cui, Jian Xu (2018), "Treatment of different parts of corn stover for high yield and lower polydispersity lignin extraction with high-boiling alkaline solvent", Bioresource Technology, pp: 737-743, Vol: 249, Impact Factor: 5.651    (External URL)
20. Faisal Ahmed, Jin-Kuk Kim, Asad Ullah Khan, Ho Young Park and Yeong Koo Yeo (2017), "A Fast Converging and Consistent Teaching-Learning-Self-Study Algorithm for Optimization: A Case Study of Tuning of LSSVM Parameters for the Prediction of NOx Emissions from a Tangentially Fired Pulverized Coal Boiler", Journal of Chemical Engineering of Japan, pp: 1–18, Vol: 50, Impact Factor: 0.644    (External URL)
21. Khalid Nawaz, Muhammad Ayub, M. B. Khan, Arshad Hussain, Abdul Qadeer Malik, Muhammad Bilal, Khan Niazi, Muzammil Hussain, Asad Ullah Khan and Noaman Ul-Haq (2016), "Effect of Concentration of Surfactant on the Exfoliation of Graphite to Graphene in Aqueous Media", Nanomaterials and Nanotechnology, Impact Factor: 1.109    (External URL)
22. Khalid Nawaz, Muhammad Ayub, Arshad Hussain, Abdul Qadeer Malik, Muhammad Bilal Khan, Muhammad Bilal Khan Niazi, Muzammil Hussain, Asad Ullah Khan and Noaman Ul-Haq (2016), "Effect of Thermal Treatment on production of Graphene from Graphite via Exfoliation in Organic Solvent (Acetonitrile)", Journal of Chemical Society of Pakistan, pp: 822-827, Vol: 32, Impact Factor: 0.276    (External URL)
23. Parveen Akhter, M. Amin Farkhondehfal, Simelys Hernández, Murid Hussain, Alberto Fina,Guido Saracco, Asad U. Khan,Nunzio Russo (2016), "Environmental issues regarding CO2and recent strategies for alternative fuels through photocatalytic reduction with titania-based materials", Journal of Environmental Chemical Engineering, pp: 3934–3953, Vol: 4    (External URL)
24. Javed Iqbal, Zulfiqar Ali, Murid Hussain, Rizwan Sheikh, Khaliq Majeed, Asad Ullah Khan , Joachim Ulrich (2016), "Formation of crystalline particles from phase change emulsion: Influence of different parameters", Chinese Journal of Chemical Engineering, pp: 929–936, Vol: 24, Impact Factor: 1.207    (External URL)
25. Zaki Ahmed, Kanwal Bilal, Asad Ullah Khan, Naila Riaz (2016), "Harnessing Green Engineering for Eco-Friendly Housing and Utilities in South Asian Countries", Journal of Petroleum & Environmental Biotechnology, pp: 295-, Vol: 7, Impact Factor: 2.5    (External URL)
26. N. Waheed, A. Mushtaq, S. Tabassum, M. A. Gilani, A. Ilyas, A. L. Khan, Asad U Khan (2016), "Mixed matrix membranes based on polysulfone and rice husk extracted silica for CO2 separation", Separation and Purification Technology, pp: 122-129, Vol: 170, Impact Factor: 3.299    (External URL)
27. Rizwan Ahmad, Zaki Ahmad, Asad Ullah Khan, Naila Riaz Mastoi, Muhammad Aslam, Jeonghwan Kim (2016), "Photocatalytic systems as an advanced environmental remediation: Recent developments, limitations and new avenues for applications", Journal of Environmental Chemical Engineering, pp: 4143–4164, Vol: 4    (External URL)
28. Robina Farooq, Gugan Jabeen, Asad U.Khan, Aqeel A. Khan (2015), "A review on Acetyl-CoA pathway for biosynthesis of organics", Asian Journal of Chemistry, pp: 01-08, Vol: 27, Impact Factor: 0.355    (External URL)
29. Atif Islam, Tariq Yasin, Aneela Sabir, Shahzad Maqsood Khan, Misbah Sultan, Asad U. Khan and Tahir Jamil (2015), "High-temperature electrical properties of silane cross-linked chitosan/poly(vinyl alcohol) membrane: thermal, mechanical and surface characterization", e-Polymers, pp: 255–261, Vol: 15, Impact Factor: 0.812    (External URL)
30. Faizan Ahmad, Lau Kok Keong, Serene Sow Mun, Sikander Rafiq,Asad Ullah Khan, Moonyong Lee (2015), "Hollow Fiber Membrane Model for Gas Separation: Process Simulation, Experimental Validation and Module Characteristics Study", Journal of Industrial and Engineering Chemistry, pp: 1246–1257, Vol: 21    (External URL)
31. Faizan Ahmad, Lau Kok Keong, Serene Sow Mun, Sikander Rafiq,Asad Ullah Khan, Moonyong Lee (2015), "Hollow Fiber Membrane Model for Gas Separation: Process Simulation, Experimental Validation and Module Characteristics Study", Journal of Industrial and Engineering Chemistry, pp: 1246–1257, Vol: 21, Impact Factor: 4.179    (External URL)
32. Sikander Rafiq, Abdulhalim Maulud, Zakaria Man, Mohamed Ibrahim Abdul Mutalib, Faizan Ahmad, Asad Ullah Khan, Asim Laeeq Khan, Moinuddin Ghauri and Nawshad Muhammad (2015), "Modeling in Mixed Matrix Membranes for Gas Separation", The Canadian Journal of Chemical Engineering, pp: 88-95, Vol: 93, Standard: 0008-4034, Impact Factor: 1.066    (External URL)
33. Nasir Mahmood, Asad Ullah Khan, Klaus Werner Stöckelhuber, Amit Das, Dieter Jehnichen3, Gert Heinrich (2014), "Carbon Nanotubes Filled Thermoplastic Polyurethane–Urea and Carboxylated Acrylonitrile Butadiene Rubber Blend Nanocomposites", J. Appl. Poly. Sci, Vol: 131, Impact Factor: 1.866    (External URL)
34. Nadia Naseer, Hira Fatima, Arfa Asghar, Nosheen Fatima, Naveed Ahmed, Asad U. Khan, and Nasir M. Ahmad (2014), "Magnetically Responsive Hybrid Polymer Colloids for Ultrasensitive Molecular Imaging", Journal of Colloid Science and Biotechnology, pp: 19-29, Vol: 3    (External URL)
35. Asim Laeeq Khan, Chalida Klaysoma, Amit Gahlauta, Asad Ullah Khan, Ivo F.J. Vankelecom (2013), "Mixed Matrix Membranes Comprising of Matrimid and –SO3H Functionalized Mesoporous MCM-41 for Gas Separation", Journal of Membrane Science, pp: 73–79, Vol: 447, Impact Factor: 5.557    (External URL)
36. Zulfiqar Ali, Hai Hong Le, Asad U. Khan, N. Mahmood, Sybill Ilisch and Hans-Joachim Radusch (2012), "Elastomer polarity driven morphology development and the clay localization in the organoclay filled rubber blends nanocomposites", Journal of Colloid Science and Biotechnology, pp: 60-67, Vol: 1    (External URL)
37. Iram Nadeem, Asad U. Khan et al. (2012), "In vitro total antioxidant and radical scavenging activities of organic extracts from leaves, stem and inflorescence of Cannabis Sativa L, Asian Journal of Chemistry", Asian Journal of Chemistry, pp: 5067-5072, Vol: 24, Standard: 0970-7077, Impact Factor: 0.355    (External URL)
38. N. Mahmood, Asad U. Khan, Mohammad Sohail, Zulfiqar Ali, Anwar-Ul Haq, Khan, Klaus Werner Stöckelhuber, GohsUwe, Gert Heinrich (2012), "Preparation and characterization of thermoplastic polyurethane-urea & carboxylated acrylonitrile butadiene rubber blend nanocomposites", J. Appl. Poly. Sci, pp: 3535-3643, Vol: 123, Impact Factor: 1.866    (External URL)
39. Asad U. Khan, Nasir Mahmood and Paul F. Luckham (2012), "Rheological characterisation of alumina ceramic suspensions in presence of a dispersant and a binder", J DISPER SCI TECHNOL, pp: 1210-1217, Vol: 33, Standard: 0193-2691, Impact Factor: 0.56    (External URL)
40. Asad Ullah Khan, Anwar Ul Haq, Nasir Mahmood, Zulfiqar Ali (2012), "Rheological Studies of Aqueous Stabilised Nano-zirconia Particle Suspensions", Mater Res-Ibero-Am J, pp: 21-26, Vol: 15, Impact Factor: 0.788    (External URL)
41. Asad U. Khan, N. M. Ahmad, N. Mahmood (2012), "Rheological Studies on Stabilised Zirconia Aqueous Suspensions", Journal of Colloid Science and Biotechnology, pp: 175-184, Vol: 1    (External URL)
42. N. Mahmood, A. U. Khan et al (2011), "In situ FTIR-ATR studies on the structure development of polyurethane-urea systems", J. Appl. Poly. Sci, pp: 1012-1018, Vol: 122, Impact Factor: 1.866    (External URL)
43. N. Mahmood, M. S. Khan, A.U. Khan, K. W. Stöckelhuber, G. Heinrich (2010), "Purification, surface modification of coal ash and its potential application in rubber composites", Journal of Applied Polymer Science, J. Appl. Poly. Sci, pp: 1493-1501, Vol: 117, Issue: 3, Standard: 0021-8995, Impact Factor: 1.866    (External URL)
44. N. Mahmood, A. U. Khan and J. Kressler (2010), "Diffusion Aided Joint Healing in Polymers at Interfaces", J. of Adhesion, pp: 290-305, Vol: 86, Issue: 3, Standard: 0021-8464, Impact Factor: 1.409    (External URL)
45. A. U. Khan, N. Mahmood and A. A. Bazmi (2009), "Direct Comparison Between Rotational and Extrusion Rheometers", MATER RES-IBERO-AM J, pp: 477-481, Vol: 12, Standard: 1516-1439, Impact Factor: 0.788    (External URL)
46. J. Hay and A. Khan (2002), "Environmentally Friendly Coatings Using Carbon Dioxide as Carrier Medium (Review)", J MATER SCI, pp: 4743-4752, Vol: 37, Standard: 0022-2461, Impact Factor: 2.302    (External URL)
47. A. U. Khan, P. F. Luckham, S. Manimaaran and M. Rivenet (2002), "The strength of colloidal interactions in the presence of ceramic dispersants and binders", J Mater Chem, pp: 1743 -1747, Vol: 12, Standard: 0959-9428, Impact Factor: 8.862    (External URL)
48. A. U. Khan, B. J. Briscoe and P. F. Luckham (2001), "Evaluation of Slip in Ceramic Paste Extrusion", J EUR CERAM SOC, pp: 483-491, Vol: 21, Standard: 0955-2219, Impact Factor: 2.933    (External URL)
49. A. U. Khan, B. J. Briscoe and P. F. Luckham (2000), "Interaction of Binder with Dispersant Stabilised Alumina Suspensions", COLLOID SURFACE A, pp: 243-257, Vol: 161, Standard: 0927-775, Impact Factor: 2.760    (External URL)
50. B. J. Briscoe, A. U. Khan and P. F. Luckham (1998), "Optimising the Dispersion on an Alumina Suspension Using Commercial Polyvalent Electrolyte Dispersants", J EUR CERAM SOC, pp: 2141-2147, Vol: 18, Standard: 0955-2219, Impact Factor: 2.933    (External URL)
51. B. J. Briscoe, A. U. Khan and P. F. Luckham (1998), "Stabilising Zirconia Aqueous Suspensions Using Commercial Polyvalent Electrolyte Solutions", J. Euro. Ceram. Soc., pp: 2169-2173, Vol: 18, Standard: 0955-2219, Impact Factor: 2.933    (External URL)
52. B. J. Briscoe, A. U. Khan, P. F. Luckham and N. Özkan (1997), "Optimisation of Ceramic Suspensions", Key Eng. Mater, pp: 281-284, Vol: 132-136, Standard: 1013 -9826, Impact Factor: 0.39    (External URL)
53. A. U. Khan, P. F. Luckham and S. Manimaaran (1997), "Probing the Mechanism by which Ceramic Dispersants Act", J. Mater. Chem., pp: 1849-1853, Vol: 7, Standard: 0959-9428, Impact Factor: 8.862    (External URL)
54. B. J. Briscoe, A. U. Khan, P. F. Luckham, N. Özkan and S. K. Sinha (1995), "Engineering of Particle Interactions in Wet Processing of Alumina Ceramics", Ceram. Proc, pp: 93-98, Vol: 2   
Conference Papers:
1. Asad U. Khan (2018) "Controlling Interpartcle Interactions through the Use of Commercial Polyvalent Organic Electrolytes", 4th Conference on Sustainability in Process Industry (SPI 2018)   
2. Asad U. Khan (2018) "Controlling Interpartcle Interactions to stabilise Nano-Particles of Metal-Oxides by Using Polyvalent Organic Electrolytes", 2nd Universiti Teknologi PETRONAS (UTP)–Pak collaboration workshop, 15-20th August 2018   
3. Asad U Khan and Khurram Tahir (2018) "Photocatalytical degradation of Congo red (CR) dye by nano Titanium dioxide coated glass bead under UV light", 1st International Conference on Advances in Engineering and Technology (ICAET) on April 2-3, 2018   
4. Asad U. Khan and Naila Riaz Mastoi (2017) "Enhancing corrosion resistance and mechanical properties of super-hydrophobic aluminum alloy", Conference on Emerging Materials and Processes 2017   
5. Asad U. Khan and Naila Riaz Mastoi (2017) "Improved Corrosion Resistance and Mechanical Properties of Super-Hydrophobic Aluminium Alloy", Universiti Teknologi PETRONAS (UTP)-Pakistani Universities Research Collaboration Workshop, 9-15th April, 2017   
6. Asad U Khan and Naila Riaz Mastoi (2017) "Improved Corrosion Resistance and Mechanical Properties of Super-Hydrophobic Aluminum Alloy", BIT’s 7th Annual World Congress of Nano Science & Technology – 2017, October 24-26, 2017   
7. Asad U. Khan and Nasir Mahmood (2015) "A comparative study of ceramic dispersants using atomic force microscopy", 5th International Colloids Conference, 21-24 June, 2015    
8. Asad U. Khan, Zaki Ahmad, Ahmad Shafique, Khurram Tahir, Naila Riaz (2015) "An Economical and UV Assisted Crumb Rubber Device for Harnessing Drinking Water from River", American Institute of Chemical Engineering (AIChE) Annual Meeting 2015, November 8-13, 2015   
9. Zaki Ahmad, Ahmad Shafique, Khurram Tahir, Naila Raiz, Asad U. Khan (2014) "Bio-Model U.V. Photocatalytic Reactor Assisted Crumb Rubber Device to produce Pathogen Free Drinking Water", he 3rd ASEAN-Pakistan Conference on Materials Science (APCoMS-3), November 25-27, 2014   
10. S. N. Malik, R. Farooq and A. U. Khan (2012) "Pakistan’s energy pathways to 2050 and development of clean coal utilization techniques", UK – Pakistan Coal Conference (UKPKCC) 2012, July 3–5, 2012   
11. John N Hay, Rina Kamal, Asad Khan, Ray Lane and Mojtaba Ghadiri (2002) "Development of Stabilisers for Use in Spray Coatings Using Supercritical Carbon Dioxid", 8th Meeting on Supercritical Fluids, 14-17 April 2002   
12. B. J. Briscoe, A. U. Khan, P. F. Luckham and N. Özkan (1996) "Rheology of Alumina in Organic and Aqueous Media and Its Effect on the Final Formed Bodies", XIIth International Congress on Rheology,August 18-23, 1996   
13. B. J. Briscoe, A. U. Khan, P. F. Luckham and N. Özkan (1996) "Rheology of alumina in organic and aqueous media and its effect on the final formed ceramic bodies", 5th World Congress for Particle Technology, Vol. V, pp.472-477, July 14-18, 1996,   
14. Brian J. Briscoe, Asad U. Khan, Paul F. Luckham*, Necati Özkan and Sujeet K. Sinha (1995) "ENGINEERING OF PARTICLE INTERACTIONS IN WET CERAMIC PROCESSING OF ALUMINA CERAMICS", 4th Conference and Exhibition of the European Ceramic Society (ECerS 1995), October 2-6, 1995   

Qualification

PhD
Imperial College, London, United Kingdom
Oct 1993 to Feb 1997
   
MSc Advance Chemical Engineering
Imperial College, London, United Kingdom
Sep 1992 to Sep 1993
   

Experience

Professor
COMSATS University Islamabad, Lahore Campus
Aug 2011 to Date
   
Head of the Chemical Engineering Department
COMSATS University Islamabad, Lahore Campus
Feb 2010 to Feb 2019
   
Chairman, Department of Chemical Engineering
COMSATS University Islamabad, Lahore Campus
Apr 2011 to Jun 2018
   
Associate Professor
COMSATS University Islamabad, Lahore Campus
Feb 2010 to Aug 2011
   
Assistant Professor
COMSATS University Islamabad, Lahore Campus
Aug 2008 to Jan 2010
   
Disclaimer: Profiles are editable by employees who may share the data of publications, experience and education upto the extent they want to share. Also CIIT Lahore is not responsible for any display of data on personal profiles.