Dr. Tareq Manzoor
Associate Professor, Energy Research Center
Area of Interest: energy efficiency, thermal analysis, thermoelastic systems, heat transfer, advanced materials, computational mechanics, advanced coatings and Tribology, machine design, Fiinte element Analysis
Tel # (Off): 111-001-007  

Personal Information

 

Dr TAREQ MANZOOR is Tenured Associate Professor in  Energy Research Center and specialized in the area of advanced materals, energy, thermal science and Computational Solid Mechanics /CFD. His main area is study of mathematical modeling based on Partial differential equations. His area of interest is both numerical and analytical techniques. He also has got experience of utilizing FEA softwares. His current research is focused on Experimental and modeling/simulation of energy and thermo-fluid engineering. 

https://orcid.org/my-orcid?orcid=0000-0003-1719-4449

https://scholar.google.com/citations?user=MJo9LU4AAAAJ&hl=en 

 

Tow NRPU projects approved as Co Pi:

ID: 14182 , Title, 

1. Design and Analysis of high-performance energy efficient optoelectronic devices for Pakistan.

 ID: 18835, title 

2. Development of Micro-texturing machine for enhancing the efficiency of Automotive components. 

 

 

REVIEWER OF INTERNATIONAL JOURNALS

  1. Energy, Elsevier.
  2. Mechanical Sciences, Copernicus Associate Editor.
  3. Mechanics of materials, Elsevier.
  4. Transactions of Mechatronics, IEEE.
  5. Energy Efficiency, Springer.
  6. Journal of Mechanical Science and Technology, Springer.
  7. Journal of the European Optical Society-Rapid Publications, Springer.
  8. Journal of manufacturing, ASME.
  9. International Journal of Hydrogen Energy - Elsevier

 

 

 

 

 Research Thesis Supervision:

#

 Student Name

   Thesis Title

MS/PhD

Supervisor / Co-Supervisor

Status: Registered / Completed

1.        

Usman Inayat

Modeling and Optimization of solar energy systems

PhD

Co-Supervisor

Registered

2.        

 Hassan

Modeling and simulation of energy storage devices 

PhD

Co-Supervisor

Registered

           
           

3.        

 

Ali Raza

Modeling Reaction Diffusion Equation for Thermal System

MS

Supervisor

Completed

4.        

 

Tariq Javed

Thermo-physical characterization of cu/zn ferrite nanoparticles for industial applications

MS

Supervisor

Completed

5.        

Umar Farooq

Numerical Analysis of Conjugate heat transfer system

MS

Supervisor

Completed

           

6.        

Uzair Siddiqui

CFD Analysis of exhaust system of diesel engine

MS

Supervisor

Submitted for approval

7.     

Shaheen Ahmad

CFD Analysis of flow in porous in media’.

MS

Supervisor

Submitted for approval

8.     

Kafayat Ullah

Characterization of nanocomposites

MS

Supervisor

Submitted for approval

 

 

 

Some of Short Courses/CPD  conducted

 

  • Thermal Ssytem design
  • An Integrated Approach for Prospect Evaluation/Generation.
  • Quality control modules for modern Industry.
  • Advanced Finite Element Analysis.
  • Non Linear Finite Element Analysis.
  • Advance Structural Design and Analysis.
  • Advance Heat Transfer.

 

 

 

 

 

Funded Projects:

Current Projects:
1. Development of Micro-texturing machine for enhancing the efficiency of Automotive components (2022 - 2024) PIs: Dr. Tareq Manzoor, Other Team: Dr Arslan Ahmed, Budget: 10, Funded By: HEC .
2. Design and Analysis of high-performance energy efficient optoelectronic devices for Pakistan (2022 - 2024) PIs: Dr. Tareq Manzoor, Budget: 10, Funded By: HEC .
3. Analysis energy storage system (2020 - 2023) PIs: Dr. Tareq Manzoor, Funded By: HEC .

Publications:

Journal Papers:
1. Bilal yusuf, Tareq Manzoor (2022), " Investigation of Influence of Elbow on Pump Inlet Flow Behaviour in Cavitating Flow ", Engineering Failure Analysis, Vol: 138, ISSN: 13506307, DOI: https://doi.org/10.1016/j.engfailanal.2022.106420, Impact Factor: 3.64    (External URL)
2. Rashid Ali, Tareq Manzoor (2022), "Analysis for elimination of solidification defects in casting process of aluminium alloy ", Journal of Mechanical Science and Technology, Impact Factor: 1.87    (External URL)
3. Tareq Manzoor (2022), "Analysis of vertical axis wind turbine blade for off-shore applications ", Wind Enginnering , Impact Factor: 2.4   
4. Tareq Manzoor (2022), "CFD thermal analysis of flat plate solar collector for different temperature variations ", International Journal of Energy and Water Resources   
5. Uzair Riaz , Tareq Manzoor (2022), "Computational Techniques and their Usage to Optimize Car Design for Better Performance C ", Innovative Computing Review   
6. Bilal, Tareq Manzoor (2022), "Investigation of Influence of Elbow on Pump Inlet Flow Behaviour in Cavitating Flow ", Engineering Failure Analysis, Impact Factor: 3.4    (External URL)
7. TAREQ manzoor (2021), "Groundwater investigations in the Hattar industrial estate and its vicinity, Haripur district, Pakistan: An integrated approach ", Kuwait Journal of Science , Vol: 48, Impact Factor: 1.1   
8. Usman, Tareq Manzoor, Iqbal (2021), "Numerical Investigation of Heat Transfer on Unsteady Hiemenz Cu-Water and Ag-Water Nanofluid Flow over a Porous Wedge Due to Solar Radiation", Applied Sciences, pp: 10855, Vol: 11(22), Impact Factor: 3.3    (External URL)
9. Tareq Manzoor, Muhammad Zafar, Muddassir Ali and Woo Young Kim (2021), "Performance Analysis of Magnetic Nanoparticles during Targeted Drug Delivery: Application of OHAM. ", Computer Modeling in Engineering and Sciences, Impact Factor: 2.2   
10. Gohar, Tareq Manzoor, Arslan (2021), "Recovery and effective utilization of waste heat from the exhaust of internal combustion engines for cooling applications using ANSYS ", Mechanical Engineering Science , Impact Factor: 2.3    (External URL)
11. M Naveed, Tareq Manzoor, Arslan Ahmed (2021), "State-of-the-Art and Future Perspectives of Environmentally Friendly Machining Using Biodegradable Cutting Fluids", Energies, pp: 4816, Vol: 14, DOI: DOI: 10.3390/en14164816, Impact Factor: 3.004   
12. M Naveed, Tareq Manzoor, Arslan Ahmed (2021), "State-of-the-Art and Future Perspectives of Environmentally Friendly Machining Using Biodegradable Cutting Fluids", Energies, pp: 4816, Vol: 14, DOI: DOI: 10.3390/en14164816, Impact Factor: 3.4   
13. Usman, Tareq Manzoor (2021), "Theoretical Investigation of Two-dimensional Nonlinear Radiative Thermionics in Nano-MHD for Solar Insolation: A Semi-Empirical Approach", Computer Modeling in Engineering and Sciences, Impact Factor: 2.1   
14. TAREQ manzoor (2021), "Theoretical Investigation of Unsteady MHD Flow within non-Stationary Porous Plates ", HELIYON, Vol: 7, Impact Factor: 3.77    (External URL)
15. Tareq Manzoor, Muhammad Zafar, Sanaullah Manzoor, Muddassir Ali and Woo Young Kim (2020), "‘Effect of Microstructural Phases on Thermo-mechanical Analysis of Ductile Cu-Al–Mn-Ni Memory Alloys for Structural Applications", Materials Express , Issue: 10, Impact Factor: 2.2    (External URL)
16. Tareq Manzoor, Muhammad Zafar, Sanaullah Manzoor, Muddassir Ali and Woo Young Kim (2020), "An improved micro-thermo-mechanics model for shape memory alloys: analysis and applications", Materials Research Express , Vol: Volume 7, Number 5, Impact Factor: 2.2    (External URL)
17. Habib Ullah manzoor, Tareq Manzoor, (2020), "Analysis of Multiple Surface Electromagnetic waves on the planner interface of Hyperbolic medium and Rugate filter having Sinusoidal refractive index profile", Plasmonics, Impact Factor: 2.92   
18. Habib Ullah Manzoor, Tareq Manzoor, Moustafa H. Aly (2020), "FWM Mitigation in DWDM Optical Networks", Journal of Physics, IOP Conference series   
19. Saqib Saleem and Tareq Manzoor (2020), "Granger causal analysis of electrohysterographic and tocographic recordings for classification of term vs.preterm births", Biocybernetics and Biomedical Engineering, Impact Factor: 5.6   
20. Habib Ullah manzoor, Tareq Manzoor, (2020), "Improved transmission length in the presences of Ambient Noise using Duobinary Modulation", Microwave and Optical Technology Letter, , Issue: 62, Impact Factor: 1.4    (External URL)
21. Habib Ullah Manzoor, Songzuo Liu Tareq Manzoor, Saqib Saleem, (2020), "Improving FWM efficiency in Bi-directional ultra DWDM-PON networking centered light source by using PMD emulator,", Results in Physics, Vol: Volume 16, March 2020, 102922, Impact Factor: 4.4    (External URL)
22. Tareq Manzoor, Gohar (2020), ""Integrated Thermo – Economic Analysis of Industrial Boilers: A Cost Effective Approach ", International Journal of energy and water resources   
23. Ghulam Abbas Gohar,Tareq Manzoor (2020), "Synthesis and Investigate the Properties of Cu-Al-Ni Alloys with Ag Addition Using Powder Metallurgy Technique", Journal of Alloys and Compounds, Impact Factor: 6.3   
24. Tahir , Tareq Manzoor (2020), "Tahir Manzoor, Tareq Manzoor, Mediating Role of the Organizational Cynicism in the Relationship between Workplace Incivility and Turnover Intensions", Decision, Springer   
25. Tareq Manzoor, Muhammad Zafar, Sanaullah Manzoor, Muddassir Ali and Woo Young Kim (2020), "Theoretical Analysis of Roll-over-web Surface Thin Layer Coating ", Coatings MDPI, Vol: 10, Impact Factor: 3.2    (External URL)
26. Saqib Saleem and Tareq Manzoor (2019), "A strategy for classification of `vaginal vs. cesarean section' delivery: bivariate empirical mode decomposition of cardiotocographic recordings", Frontiers in Physiology, Issue: 19, Impact Factor: 4.75    (External URL)
27. Tareq Manzoor, Kashif Nazar, Muhammad Zafar , Shaukat Iqbal ,Muddassir Ali ,Woo Young Kim ,Mahmood Saleem and Sanaullah Manzoor, (2019), "Analysis of a Thin Layer Formation of Third-grade Fluid", Coatings MDPI, Vol: 9(11), Impact Factor: 3.288    (External URL)
28. Ghulam Abbas Gohar,Tareq Manzoor, Arslan (2019), "Design and Comparative Analysis of an INVELOX Wind Power Generation System for Multiple Wind Turbine through CFD", Advances in Mechanical Engineering, Vol: Volume: 11 issue: 4,, Impact Factor: 1.536    (External URL)
29. H M yunus, Tareq Manzoor (2019), "Dynamical Study of Fokker-Plank Equations By Using Optimal Homotopy Asymtotic Method,", Mathematics MDPI, Impact Factor: 2.5    (External URL)
30. Muhammad Zafar, Tareq Manzoor, Sheik Abdur Rahman , Woo Young Kim, Mahmood Saleem , Do-Heyoung Kim, (2019), "Effect of randomly grown morphology of ZnO nanorods in inverted organic solar cells", Journal of Nanoscience and Nanotechnology, Impact Factor: 1.56    (External URL)
31. Tahir Sattar, Tareq Manzoor, F A Khalid (2019), "Electrochemical behavior of hydroxyapatite-coated NiTi shape memory alloy", Journal of materials sciecne, Vol: Volume 54, Issue 9, pp 7300–7306., Impact Factor: 4.62    (External URL)
32. Hussnain, Tareq Manzoor (2019), "Fabrication and Characterization of AA6061/CNTs Surface Nano Composite by Friction Stir Processing", International Journal of Advanced Manufacturing Technology, Springer, Vol: Volume 105, Issue 1–4, pp 749–769 ., Impact Factor: 3.4    (External URL)
33. Tareq Manzoor, Abdul razzaq (2019), "Facile Synthesis of CuxZn1-xFe2O4 Nanoparticles and their Thermo-Physical Properties Evaluation", Applied Physics A, Vol: 125, Impact Factor: 2.952    (External URL)
34. Shahab U. Ansari, Masroor Hussain, Suleman Mazhar, Tareq Manzoor, Khalid J. Siddiqui,· Muhammad Abid (2019), "Mesh Partitioning and Efficient Equation Solving Techniques by Distributed Finite Element Methods: A Survey", Archives of Computational Methods in Engineering, Vol: Volume 26, Issue 1, 1–16 (2019) , Impact Factor: 8.1    (External URL)
35. Masroor Hussain, Tareq Manzoor (2019), "Performance analysis of parallel stabilized mixed Galerkin method for three-dimensional transient Darcy flow using mesh reordering techniques", Journal of Petroleum Science and Engineering, Vol: Volume 176, May 2019, Pages 621-631, Impact Factor: 5.16    (External URL)
36. Habib Ullah manzoor, Tareq Manzoor, (2018), "Analysis of Bloch surface waves at the Interface Between Two Semi-infinite Rugate Filters with Symmetric Refractive Index Profiles", plasmonics, Vol: 13, Impact Factor: 2.92    (External URL)
37. Hussain Riaz ,Tareq Manzoor (2018), "Fabrication and Characterization of AA6061/CNTs Surface Nano Composite by Friction Stir Processing", International Journal of Advanced Manufacturing Technology, Springer, Impact Factor: 4.2    (External URL)
38. Habib Ullah manzoor, Tareq Manzoor, (2018), "FWM Reduction Using Different Modulation Techniques and Optical Filters in DWDM Optical Communication Systems: A Comparative Study,", Iranian Journal of Science and Technology,https://doi.org/10.1007/s40998-019-00189-4,, Impact Factor: 1.8    (External URL)
39. Ghulam Abbas Gohar,Tareq Manzoor, Assad Naeem Shah, (2018), "Investigation of Thermal and Mechanical Properties of Cu-Al alloys with silver addition prepared by Powder Metallurgy", Journal of Alloys and Compunds, Impact Factor: 6.3    (External URL)
40. Habib Ullah manzoor, Tareq Manzoor, (2018), "Multiple Bloch surface waves in visible region of light at the interfaces between rugate filter/rugate filter and rugate filter/dielectric slab/rugate filter", Journal of Optics, Impact Factor: 2.7    (External URL)
41. Tareq Manzoor, Zaffar Mehmood, Manzoor A. Zahid, S. Tauseef Mohyud-Din, Habibullah Manzoor and Sadiq Hashmi, (2017), "A note on fractional order in thermo-elasticity of shape memory alloys’ dampers", International Journal of Heat and Mass Transfer, Impact Factor: 5.5    (External URL)
42. Manzoor Tareq, Khalil S, Khan I, Gohar GA and Abid M (2017), " Design and Development of Flexible Vacuum Clamping System for Thin Walled Cylindrical Object for CNC Machines", Journal of Applied Mechanical Engineering, Impact Factor: 0   
43. Habib Ullah Manzoor, Tareq Manzoor, (2015), "Complete suppression of FWM in ultra dense WDM-PON optical networks using centralized light source", Journal of Nonlinear Optical Physics & Materials,, Impact Factor: 1.4   
44. Habib Ullah manzoor, Tareq Manzoor, (2015), "Complete suppression of FWM in ultra dense WDM-PON optical networks using centralized light source", Journal of Nonlinear Optical Physics & Materials, Impact Factor: 1.56   
45. Tareq Manzoor, G Shabbir and F A Khalid (2012), "Two-Dimensional Analytical Technique for Stress Wave Model for Memory Alloy Dampers", Journal of Mechanical Science and Technology, Impact Factor: 1.7   
Conference Papers:
1. TAREQ MANZOOR (2021) " Design and comparative analysis of an INVELOX wind power generation system ", CPD Activity-A Virtual Symposium on Advantages and Challenges of Wind Energy    
2. Usman inayat , Tareq Manzoor (2021) "A survey on computational parametric analysis of incompressible nanofluids applications in solar energy systems", ICIC 2021   
3. Usman inayat , Tareq Manzoor (2021) "A survey on computational parametric analysis of incompressible nanofluids applications in solar energy systems", ICIC 2021   
4. Tareq Manzoor (2018) "Techno-economo-environmental viability assessment of Grid-Connected photovoltaic system- A case for different cities of Pakistan", PGSRET 2018   
5. Tareq Manzoor (2016) "CFD Analysis of performance of circular pipe flat plate solar collector,", International Conference on Energy for Environmental and Economic Sustainability (ICEEES2016)   
6. Tareq Manzoor (2015) " Design & Fabrication of Compressed Air Vehicle Engine System", ESSD-2015   

Qualification

PhD
Ghulam Ishaq Khan Institute of Engineering Sciences and technology, Topi Swabi, Pakistan
Jan 2007 to May 2012
   

Experience

Tenured Associate Professsor
COMSATS UNIVERSITY
Mar 2020 to Date
   
Assistant Professor
COMSATS UNIVERISTY ISLAMABAD
Mar 2013 to Date
   
Assistant Professor
HITEC UNIVERSITY
Jan 2011 to Feb 2013
   
Design Engineer
Industries
Jan 2002 to Dec 2006
   

Disclaimer: Profiles are editable by employees who may share the data of publications, experience and education upto the extent they want to share. Also CIIT Lahore is not responsible for any display of data on personal profiles.